All About A Finance Broker

Types and Application of Concrete Staining Materials

Aug 17

Staining can be done easily and cheaply to improve the look of concrete surfaces. This type of flooring is produced by pouring a water-based solution on a concrete surface that is cleaned.


Concrete Staining

Sealers can be used to guard staining against wear and fade. Concrete is extremely absorbent, allowing it to stain in any color you can imagine. Various chemicals and processes are available for concrete staining Albuquerque in various colors and shades.


What are the various types of concrete stains?


It is possible to classify concrete stains into two types:


The staining of concrete with a reactive chemical is the best option.

Reactive concrete staining is typically composed of inorganic metallic salts or hydrochloric acid. These react with concrete minerals. The chemical reaction creates an irresistible bond to concrete and also etches the surface to create marble-like effects.


Compared to non-reactive or water-based stains, reactive stains or acid stains offer fewer color options and require more security precautions and expertise.


Concrete Staining That Isn't Reactive

Non-reactive stains, water-based acrylic polymers, and pigments can be produced without needing a chemical reaction. It's designed to penetrate concrete deeper and deposit colored particles into the open pores of the surface.


A sealant is applied to the surface to prevent stains from flaking, peeling, and fading.


Polymer-bonded technology in water-based stains, for example, reduces the likelihood of stain peeling, fading, or flaking, while still being non-toxic to the environment.


Water-based staining is getting more sought-after because they are available in various hues and colors. They range from the most delicate and transparent tones to vibrant solids.


There are no bad effects when mixing non-reactive stains to create new colors since they do not react with concrete. Non-reactive stains, in contrast, doesn't contain solvents or acid, making them much easier to apply.


Concrete staining Albuquerque is both reactive and non-reactive. It's a great way to bring back old surfaces like countertops or concrete patios.


The Staining Process for Concrete


Concrete staining Albuquerque requires about two days. It is simple but can be time-consuming. Concrete straining includes the following steps:


Concrete Surface Preparation

  • It doesn't matter how old the concrete is; careful surface preparation is necessary.

  • Concrete cleaning products and concrete grinding solutions thoroughly clean concrete surfaces and remove debris, residues, and dirt.

  • Any stain or coating already present on concrete must be removed before staining.

  • Concrete crack sealants are utilized in the event they are discovered.

  • The use of floor cleaners is to scrub off rough spots.


Techniques for Staining


  • Tape can be placed over any surface exposed to stop stains from settling.

  • The stain must be softly dispersed in water to get the desired shade.

  • The surface is then coated with an airless sprayer or brush.

  • Depending on the temperatures, humidity, and airflow, the freshly applied stain can take between 10 and 10 hours to dry completely.

  • For a deeper shade, follow the same steps as before.


Get rid of the Spillage.

  • The concrete should be rinsed with clear water to wash away any residue.

  • T.S.P. or baking soda can neutralize acid-based stains.

  • The final rinse is completed using a brush to remove any remaining dirt.

  • Applying the sealant

  • Concrete sealers can be employed to help maintain the stain-resistant properties of concrete.

  • The concrete should be allowed to cure for at minimum one day after sealants have been applied.

  • It is advised to apply two coats of sealer to ensure maximum longevity.


Concrete Contractors Albuquerque

5416 La Colonia Dr NW, Albuquerque, NM 87120